diff --git a/README.md b/README.md
index c3f65b1..4fc00cd 100644
--- a/README.md
+++ b/README.md
@@ -87,6 +87,10 @@ image's native package manager before testing. Package setup is opt-in and
 requires bridge networking. See [configuration and migration](docs/configuration.md) and
 [why a shell script works on Ubuntu but fails on Alpine](docs/troubleshooting.md).
 
+Testing an installer? Use the [installation smoke test workflow](docs/installer-smoke-test.md)
+to check the installed binary inside each container. A script's zero exit status
+alone does not prove it installed successfully.
+
 ## Quickstart
 
 ### In GitHub Actions
diff --git a/docs/installer-smoke-test.md b/docs/installer-smoke-test.md
new file mode 100644
index 0000000..79243c4
--- /dev/null
+++ b/docs/installer-smoke-test.md
@@ -0,0 +1,55 @@
+# Verify what an installer actually installed
+
+A shell script can print “Installation finished” and return zero after a failed
+download or extraction. OpsScript Gate checks the exit status of the command it
+runs; it cannot infer which files an arbitrary installer should have created.
+For an installer, make that contract explicit: install the binary, check that it
+exists, then execute a harmless smoke command inside the same container.
+
+## Copy the workflow
+
+Copy [installer-smoke.yml](../examples/github-actions/installer-smoke.yml) into
+`.github/workflows/installer-smoke.yml` in your project. Edit:
+
+- `install.sh` to your standalone installer path.
+- `$HOME/.local/bin/mytool` to the installed binary path.
+- `--version` to a noninteractive command that demonstrates the installed binary
+  can start. It must return nonzero on failure.
+- The packages, timeout and distribution matrix to match your supported setup.
+- The trigger paths to include release packaging configuration if it affects the
+  archive name or layout.
+
+The workflow embeds the current checked-out installer into a temporary script.
+It runs the installer in a subshell and checks the binary afterwards. Even an
+installer with an explicit `exit 0` cannot skip the check. A nonzero installer
+status is preserved. The check and installer run in the **same container**;
+checking for the installed binary on the GitHub runner would test a different
+filesystem.
+
+The default example enables network access to download release assets and adds
+Bash, curl, CA certificates and tar. Those are test prerequisites, not evidence
+that your installer provisions them. If you promise installation on a bare
+image, also test that scenario separately.
+
+## Interpret the result
+
+- An executable binary and a successful smoke command prove the tested artifact
+  could install and start in that container during that run.
+- A missing binary fails even if the installer returned zero.
+- A downloaded binary that cannot start also fails.
+- HTTP errors, rate limits and changed release assets can affect the result.
+  Inspect the saved report before attributing a failure to a distribution.
+
+This is not a test of your application's complete behavior. Containers share
+the host kernel and do not represent a full booted machine. OpsScript Gate mounts
+only the target script; installers that need sibling repository files require a
+different integration setup.
+
+## A failure this check caught
+
+In a [public fork validation of Latitude's CLI installer](https://github.com/Mresyzz/cli/actions/runs/38145896335),
+the Ubuntu 22.04 job downloaded content that could not be extracted as gzip. The
+installer continued and printed “Installation finished”. An installation check
+then failed because `$HOME/.lsh/lsh` was absent. Debian 12, Ubuntu 24.04 and Alpine
+3.20 passed in that run. This demonstrates a caught installation failure, not a
+proven Ubuntu-specific defect or an endorsement by the upstream maintainers.
diff --git a/examples/github-actions/README.md b/examples/github-actions/README.md
index 1c08f0b..97b564f 100644
--- a/examples/github-actions/README.md
+++ b/examples/github-actions/README.md
@@ -3,3 +3,9 @@
 This example shows a GitHub Actions workflow for checking a shell script on pull requests.
 
 Copy `workflow.yml` into your repository at `.github/workflows/script-gate.yml` and point `script-path` to the script you want to validate. The example uses the published v0.9.4 release.
+
+For a downloading installer, use [installer-smoke.yml](installer-smoke.yml) and
+adapt its installed binary path and smoke command. This checks that installation
+actually produced a working binary, even when the installer returns zero after
+a failed download. See the [installer smoke test guide](../../docs/installer-smoke-test.md)
+for the result boundaries and setup instructions.
diff --git a/examples/github-actions/installer-smoke.yml b/examples/github-actions/installer-smoke.yml
new file mode 100644
index 0000000..0a852af
--- /dev/null
+++ b/examples/github-actions/installer-smoke.yml
@@ -0,0 +1,53 @@
+name: Installer smoke test
+
+on:
+  pull_request:
+    paths:
+      - install.sh
+      - .github/workflows/installer-smoke.yml
+  workflow_dispatch:
+
+permissions:
+  contents: read
+
+jobs:
+  installer:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v7
+        with:
+          persist-credentials: false
+
+      # Replace the binary path and smoke command with your installer's contract.
+      - name: Prepare installer and installation check
+        shell: bash
+        run: |
+          {
+            printf '#!/bin/bash\n(\n'
+            cat install.sh
+            printf '\n)\ninstaller_status=$?\n[ "$installer_status" -eq 0 ] || exit "$installer_status"\n'
+            cat <<'EOF'
+          binary="$HOME/.local/bin/mytool"
+          test -x "$binary" || { echo "Installer did not create $binary" >&2; exit 1; }
+          "$binary" --version
+          EOF
+          } > installer-smoke.sh
+
+      - name: Install and verify in each distribution
+        uses: Mresyzz/opsscript-gate@v0.9.4
+        with:
+          script-path: installer-smoke.sh
+          shell: bash
+          matrix: debian:12-slim,ubuntu:22.04,ubuntu:24.04,alpine:3.20
+          network: bridge
+          packages: bash,curl,ca-certificates,tar
+          timeout: '120'
+          output: reports/installer-smoke.json
+
+      - name: Save report, including failed installs
+        if: always()
+        uses: actions/upload-artifact@v4
+        with:
+          name: installer-smoke
+          path: reports/installer-smoke.json
+          if-no-files-found: ignore