From 08098351a9a3adc2c683527dce55eb3e0958339d Mon Sep 17 00:00:00 2001
From: raiden00pl <raiden00@railab.me>
Date: Mon, 27 Jul 2026 12:20:13 +0200
Subject: [PATCH] tools/nxstyle: add a script to check a whole tree at once

nxstyle checks one file per invocation.  nxstyle_sweep.sh runs it over
the directories given, or the whole repository, and collects what it
reports.

Signed-off-by: raiden00pl <raiden00@railab.me>
Assisted-by: Claude Code
---
 .../components/tools/nxstyle_sweep.rst        |  25 +++
 tools/nxstyle_sweep.sh                        | 189 ++++++++++++++++++
 2 files changed, 214 insertions(+)
 create mode 100644 Documentation/components/tools/nxstyle_sweep.rst
 create mode 100755 tools/nxstyle_sweep.sh

diff --git a/Documentation/components/tools/nxstyle_sweep.rst b/Documentation/components/tools/nxstyle_sweep.rst
new file mode 100644
index 0000000000000..def0e72d5ab70
--- /dev/null
+++ b/Documentation/components/tools/nxstyle_sweep.rst
@@ -0,0 +1,25 @@
+====================
+``nxstyle_sweep.sh``
+====================
+
+Run ``nxstyle`` over whole directories, or over the repository, and collect
+what it reports. Usage:
+
+.. code:: console
+
+   $ tools/nxstyle_sweep.sh [options] [<dir> ...]
+
+     -o <file>   Diagnostics                (default: nxstyle-errors.txt)
+     -f <file>   Failing files, worst first (default: nxstyle-files.txt)
+     -l          List failing files instead of writing the reports
+     -s          Summarise the diagnostics by message
+     -b <path>   Use an existing nxstyle binary
+     -j <n>      Number of parallel checks
+     -a          Check every file, not only those tracked by git
+     -h          Show this help
+
+Options must precede the directories, which default to the whole repository
+and are relative to its top. The exit status is non-zero if anything was
+reported.
+
+See also ``nxstyle``.
diff --git a/tools/nxstyle_sweep.sh b/tools/nxstyle_sweep.sh
new file mode 100755
index 0000000000000..e61207e8eea60
--- /dev/null
+++ b/tools/nxstyle_sweep.sh
@@ -0,0 +1,189 @@
+#!/usr/bin/env bash
+############################################################################
+# tools/nxstyle_sweep.sh
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements.  See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.  The
+# ASF licenses this file to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance with the
+# License.  You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+# License for the specific language governing permissions and limitations
+# under the License.
+#
+############################################################################
+
+# Run nxstyle over the whole repository, or over a subdirectory, and collect
+# what it reports.
+#
+# Usage: tools/nxstyle_sweep.sh [options] [<dir> ...]
+#
+#   -o <file>   Write the diagnostics to <file>  (default: nxstyle-errors.txt)
+#   -f <file>   Write the failing file names, with a count each and worst
+#               first, to <file>                 (default: nxstyle-files.txt)
+#   -l          List failing files on stdout instead of writing the reports
+#   -s          Summarise the diagnostics by message on stdout
+#   -b <path>   Use an existing nxstyle binary rather than building one
+#   -j <n>      Run <n> checks in parallel        (default: number of CPUs)
+#   -a          Check every file, not only those tracked by git
+#   -h          Show this help
+#
+# With no directory given the whole repository is checked.  Paths are taken
+# relative to the top of the repository, as nxstyle verifies the path
+# recorded in each file header.
+#
+# Examples:
+#   tools/nxstyle_sweep.sh
+#   tools/nxstyle_sweep.sh -s arch/arm/src/stm32h7
+#   tools/nxstyle_sweep.sh -l drivers | head
+#   tools/nxstyle_sweep.sh -o /tmp/errors.txt arch drivers
+
+set -u
+
+tooldir=$(cd "$(dirname "$0")" && pwd)
+topdir=$(cd "$tooldir/.." && pwd)
+
+outfile=nxstyle-errors.txt
+filefile=nxstyle-files.txt
+listonly=0
+summary=0
+nxstyle=
+jobs=$( (nproc 2>/dev/null || sysctl -n hw.ncpu 2>/dev/null || echo 4) )
+allfiles=0
+tmpdir=
+
+usage()
+{
+  # Print the block of comments that follows the licence header
+
+  awk '/^#####/                { sep++; next }
+       sep < 2                 { next }
+       /^#/                    { line = $0; sub(/^# ?/, "", line);
+                                 print line; started = 1; next }
+       started                 { exit }' "$0"
+  exit "${1:-1}"
+}
+
+cleanup()
+{
+  if [ -n "$tmpdir" ]; then
+    rm -rf "$tmpdir"
+  fi
+}
+
+while getopts ":o:f:b:j:lsah" opt; do
+  case $opt in
+    o) outfile=$OPTARG ;;
+    f) filefile=$OPTARG ;;
+    b) nxstyle=$OPTARG ;;
+    j) jobs=$OPTARG ;;
+    l) listonly=1 ;;
+    s) summary=1 ;;
+    a) allfiles=1 ;;
+    h) usage 0 ;;
+    *) usage ;;
+  esac
+done
+shift $((OPTIND - 1))
+
+trap cleanup EXIT
+tmpdir=$(mktemp -d)
+
+# Build nxstyle unless an existing binary was given
+
+if [ -z "$nxstyle" ]; then
+  nxstyle=$tmpdir/nxstyle
+  if ! ${CC:-cc} -O2 -o "$nxstyle" "$topdir/tools/nxstyle.c"; then
+    echo "ERROR: failed to build nxstyle" >&2
+    exit 1
+  fi
+fi
+
+cd "$topdir" || exit 1
+
+# Collect the files to check.  Only the sources that nxstyle understands are
+# of interest, and by default only those that are tracked by git.
+
+listing=$tmpdir/files
+: > "$listing"
+
+if [ $# -eq 0 ]; then
+  set -- .
+fi
+
+for dir in "$@"; do
+  if [ ! -d "$dir" ]; then
+    echo "ERROR: no such directory: $dir" >&2
+    exit 1
+  fi
+
+  if [ "$allfiles" -eq 0 ] && git rev-parse --git-dir >/dev/null 2>&1; then
+    git ls-files -- "$dir/*.c" "$dir/*.h" >> "$listing"
+  else
+    find "$dir" -name '*.c' -o -name '*.h' >> "$listing"
+  fi
+done
+
+sort -u "$listing" -o "$listing"
+total=$(wc -l < "$listing")
+
+if [ "$total" -eq 0 ]; then
+  echo "No C sources found" >&2
+  exit 1
+fi
+
+# Check each file, keeping the output of one file together.  Writing to a
+# file per source and concatenating afterwards avoids the interleaving that
+# a shared pipe would produce.
+
+results=$tmpdir/results
+mkdir -p "$results"
+export nxstyle results
+
+# shellcheck disable=SC2016
+xargs -a "$listing" -P "$jobs" -n 1 sh -c '
+  out=$("$nxstyle" "$1" 2>&1)
+  if [ -n "$out" ]; then
+    printf "%s\n" "$out" > "$results/$(printf "%s" "$1" | tr / _)"
+  fi
+  exit 0
+' sh
+
+collected=$tmpdir/all
+cat "$results"/* 2>/dev/null | sed "s#^$topdir/##" |
+  sort -t: -k1,1 -k2,2n > "$collected"
+
+ndiag=$(wc -l < "$collected")
+nfail=$(cut -d: -f1 "$collected" | sort -u | wc -l)
+
+if [ "$listonly" -eq 1 ]; then
+  cut -d: -f1 "$collected" | sort | uniq -c | sort -rn |
+    awk '{printf "%6d  %s\n", $1, $2}'
+else
+  cp "$collected" "$outfile"
+  cut -d: -f1 "$collected" | sort | uniq -c | sort -rn |
+    awk '{printf "%6d  %s\n", $1, $2}' > "$filefile"
+  echo "$outfile:  $ndiag diagnostics"
+  echo "$filefile: $nfail files"
+fi
+
+if [ "$summary" -eq 1 ]; then
+  echo
+  echo "Diagnostics by message:"
+  sed 's/.*: \(error\|warning\|info\): //' "$collected" |
+    sort | uniq -c | sort -rn | awk '{$1=$1; printf "%6d  ", $1;
+                                      $1=""; sub(/^ /, ""); print}'
+fi
+
+echo
+echo "Checked $total files, $nfail failed"
+
+[ "$ndiag" -eq 0 ]