diff --git a/.changeset/issue-8690-recorder-wait-audit.md b/.changeset/issue-8690-recorder-wait-audit.md
new file mode 100644
index 0000000000..99df370023
--- /dev/null
+++ b/.changeset/issue-8690-recorder-wait-audit.md
@@ -0,0 +1,9 @@
+---
+---
+
+Test-only (plugin-designer) plus one repo script. The `MetadataObjectsPage.lookupKeying`
+round-trip pin now reads its "no delete was issued" assertion after the page's
+`reload()` — the handler's last statement — instead of after the first PUT, so the
+emptiness is dated to the end of the write sequence rather than to its start. Adds
+`scripts/census-recorder-wait-shape.mjs`, the objectui#8690 corpus detector. No
+published behaviour changes.
diff --git a/packages/plugin-designer/src/MetadataObjectsPage.lookupKeying.test.tsx b/packages/plugin-designer/src/MetadataObjectsPage.lookupKeying.test.tsx
index 76b074a118..53ea1edd39 100644
--- a/packages/plugin-designer/src/MetadataObjectsPage.lookupKeying.test.tsx
+++ b/packages/plugin-designer/src/MetadataObjectsPage.lookupKeying.test.tsx
@@ -377,6 +377,18 @@ describe('objectui#6522 · SITE B — the raw-payload lookup keys every server o
     // the real payload rather than something off the prototype chain.
     expect(puts[0].body.pluralLabel).toBe('Constructors');
     expect(puts[0].body.fields).toBeDefined();
+    // COMPLETION ANCHOR (objectui#8690). The emptiness below is only worth
+    // reading once `handleObjectsChange` has run to the END: `reload()` is its
+    // last statement, so the manager receiving the re-read list is the signal
+    // that every write the handler was going to make has been made. Waiting on
+    // `puts` instead dates the absence to the FIRST write, which covers the
+    // delete scan only because that scan happens to run before the save loop —
+    // a property of the page, not one this file asserts. Measured: with a stray
+    // `reset` issued after the saves, the `puts` wait leaves the delete log
+    // green while C0/H1/H2 above — which already anchor on the reload — go red.
+    // `label` and not `name` because the name is unchanged by a rename: only
+    // the relabelled row is a value the pre-reload state cannot answer with.
+    await waitFor(() => expect(managerProps!.objects.map((o) => o.label)).toEqual(['Renamed']));
     expect(deletes).toEqual([]);
     expect(shownError()).toBeNull();
   });
diff --git a/scripts/census-recorder-wait-shape.mjs b/scripts/census-recorder-wait-shape.mjs
new file mode 100644
index 0000000000..6a6906ac2a
--- /dev/null
+++ b/scripts/census-recorder-wait-shape.mjs
@@ -0,0 +1,109 @@
+#!/usr/bin/env node
+/**
+ * Census: `await waitFor(...)` keyed on ONE recorder array, followed by a read
+ * of a DIFFERENT recorder array, with nothing establishing the second was
+ * filled. The shape objectui#8688 was one instance of; the corpus reading is
+ * objectui#8690, and this file is that card's detector, kept so the next person
+ * does not have to re-derive it.
+ *
+ * ⚠️ It answers WHERE TO LOOK, never WHAT IS WRONG. A flag is a site to read,
+ * not a defect: objectui#8690 read all nine of its strict-shape flags and found
+ * one worth repairing. ⛔ Never batch-repair a flag list.
+ *
+ * Algorithm (the card's four steps):
+ *   1. per file, recorders = every identifier that is the target of `.push(`
+ *   2. per `await waitFor(`, balance parens; recorders named inside = WAIT SET
+ *   3. scan forward to the next `await` (or EOF), collecting recorders READ
+ *      (a recorder's own `.push(` line does not count as a read)
+ *   4. flag any read of a recorder the wait did not name
+ *
+ * Two recorder-matching modes, because the choice moves the numbers:
+ *   --recorder-match=ident  bare identifiers (`calls`), receiver ignored
+ *   --recorder-match=path   dotted paths (`server.savedOpts`) — the default
+ *
+ * Measured on da5e4f69e, 2776 tracked `*.test.ts`/`*.test.tsx` files:
+ *   ident: 159 flags, 15 strict in 10 files
+ *   path : 167 flags, 18 strict in 12 files
+ * objectui#8690 reported 160 flags and 9 strict, so this re-derivation is one
+ * flag off its total and wider in the strict bucket — near enough to be the
+ * same instrument, ⛔ not near enough to quote its numbers as reproduced.
+ * The two modes' strict buckets differ and neither contains the other: `ident`
+ * misses a wait written `host.calls` (the receiver hides the recorder), `path`
+ * misses a recorder pushed as a bare `inits` and read as `host.inits[0]`.
+ * objectui#8690's nine sites are inside the UNION of the two, minus
+ * `packages/permissions` (which objectui#8688 / PR #8689 already hold).
+ *
+ * Usage: node scripts/census-recorder-wait-shape.mjs [--recorder-match=ident|path]
+ */
+import { execSync } from 'node:child_process';
+import { readFileSync } from 'node:fs';
+
+const mode = (process.argv.find((a) => a.startsWith('--recorder-match=')) ?? '').split('=')[1] || 'path';
+if (!['ident', 'path'].includes(mode)) {
+  console.error(`unknown --recorder-match=${mode} (expected ident|path)`);
+  process.exit(2);
+}
+
+const files = execSync("git ls-files '*.test.ts' '*.test.tsx'", {
+  encoding: 'utf8',
+  maxBuffer: 64 * 1024 * 1024,
+}).split('\n').filter(Boolean);
+
+const PUSH = mode === 'ident'
+  ? /([A-Za-z_$][\w$]*)\s*\.push\s*\(/g
+  : /([A-Za-z_$][\w$]*(?:\.[A-Za-z_$][\w$]*)*)\s*\.push\s*\(/g;
+const nameRe = (n) => new RegExp(`(?<![\\w$.])${n.replace(/\./g, '\\.')}(?![\\w$])`, 'g');
+const lineOf = (src, index) => src.slice(0, index).split('\n').length;
+
+const flags = [];
+for (const file of files) {
+  const src = readFileSync(file, 'utf8');
+  const recorders = new Set();
+  for (const m of src.matchAll(PUSH)) recorders.add(m[1]);
+  if (recorders.size === 0) continue;
+
+  for (const w of src.matchAll(/await\s+waitFor\s*\(/g)) {
+    // 2. balance parens to the end of the wait
+    const open = w.index + w[0].length - 1;
+    let depth = 0;
+    let end = -1;
+    for (let j = open; j < src.length; j++) {
+      if (src[j] === '(') depth++;
+      else if (src[j] === ')' && --depth === 0) { end = j; break; }
+    }
+    if (end < 0) continue;
+    const waitBody = src.slice(open, end + 1);
+    const waitSet = new Set([...recorders].filter((r) => nameRe(r).test(waitBody)));
+
+    // 3. forward window: end of the wait -> the next `await` (or EOF)
+    const rest = src.slice(end + 1);
+    const nextAwait = rest.search(/\bawait\b/);
+    const window = nextAwait === -1 ? rest : rest.slice(0, nextAwait);
+
+    for (const r of recorders) {
+      if (waitSet.has(r)) continue;
+      for (const hit of window.matchAll(nameRe(r))) {
+        if (/^\s*\.push\s*\(/.test(window.slice(hit.index + r.length))) continue;
+        flags.push({
+          file,
+          line: lineOf(src, end + 1 + hit.index),
+          waitLine: lineOf(src, w.index),
+          recorder: r,
+          waitSet: [...waitSet],
+        });
+        break; // one flag per (wait, recorder)
+      }
+    }
+  }
+}
+
+const strict = flags.filter((f) => f.waitSet.length > 0);
+console.log(`recorder-match: ${mode}`);
+console.log(`population:     ${files.length} test files`);
+console.log(`total flags:    ${flags.length}`);
+console.log(`  wait named a recorder (the strict shape): ${strict.length} in ${new Set(strict.map((f) => f.file)).size} files`);
+console.log(`  wait named no recorder (a DOM node, a hook result, a test id): ${flags.length - strict.length}`);
+console.log('--- strict-shape sites (READ each one; this list is not a defect list) ---');
+for (const f of strict.sort((a, b) => a.file.localeCompare(b.file) || a.line - b.line)) {
+  console.log(`${f.file}:${f.line}  wait@${f.waitLine} waits [${f.waitSet.join(', ')}] reads ${f.recorder}`);
+}