Can it work with 1130:660C?

[eribertomota]

Hi!

I am testing the software with a 1130:660C model (ID 1130:660c Tenx Technology, Inc. Foot Pedal/Thermometer / USB HID v1.10 Device [ PCsensor Temper]). However, I get "Found 0 devices". There is how to add support to my thermometer?

Thanks!

Eriberto

http://www.dx.com/p/usb-powered-c-f-thermometer-40-120-c-48285

[amorphic]

Hi Eriberto,

I'm a little confused. Do you have a link for "1130:660C model (ID 1130:660c Tenx Technology, Inc. Foot Pedal/Thermometer / USB HID v1.10 Device"?

The link at the bottom of your issue, (http://www.dx.com/p/usb-powered-c-f-thermometer-40-120-c-48285) is for a standard TEMPer thermometer, which is definitely supported. I'm using one!

Cheers,
James

[eribertomota]

Hi,

The same link. My thermometer is the shown in photo (I bought this in
DX.com). Is a 1130:6660c.

Thanks!

Eriberto

2014-10-03 19:07 GMT-03:00 James Stewart notifications@github.com:

Hi Eriberto,

I'm a little confused. Do you have a link for "1130:660C model (ID
1130:660c Tenx Technology, Inc. Foot Pedal/Thermometer / USB HID v1.10
Device"?

The link at the bottom of your issue, (
http://www.dx.com/p/usb-powered-c-f-thermometer-40-120-c-48285) is for a
standard TEMPer thermometer, which is definitely supported. I'm using one!

Cheers,
James

—
Reply to this email directly or view it on GitHub
#20 (comment).

[amorphic]

Can you post the output of dmesg after you plug in your device?

Here's the dmesg output after plugging in my TEMPer:

[125755.348125] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[125755.524168] usb 2-2: New USB device found, idVendor=0c45, idProduct=7401
[125755.524187] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[125755.524200] usb 2-2: Product: TEMPerV1.4
[125755.524210] usb 2-2: Manufacturer: RDing
[125755.641015] input: RDing TEMPerV1.4 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input13
[125755.641744] generic-usb 0003:0C45:7401.0001: input,hidraw0: USB HID v1.10 Keyboard [RDing TEMPerV1.4] on usb-0000:00:1d.0-2/input0
[125755.659952] generic-usb 0003:0C45:7401.0002: hiddev0,hidraw1: USB HID v1.10 Device [RDing TEMPerV1.4] on usb-0000:00:1d.0-2/input1
[125755.660097] usbcore: registered new interface driver usbhid
[125755.660105] usbhid: USB HID core driver

[eribertomota]

Thanks for your reply.

Note that your device is 0c45:7401, not a 1130:660c.

My dmesg:

[ 463.164427] usb 2-1.1: new low-speed USB device number 5 using ehci_hcd
[ 463.294414] usb 2-1.1: New USB device found, idVendor=1130,
idProduct=660c
[ 463.294419] usb 2-1.1: New USB device strings: Mfr=0, Product=2,
SerialNumber=0
[ 463.294422] usb 2-1.1: Product: PCsensor Temper
[ 463.314501] input: PCsensor Temper as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input9
[ 463.314807] generic-usb 0003:1130:660C.0006: input,hidraw5: USB HID
v1.10 Keyboard [ PCsensor Temper] on usb-0000:00:1d.0-1.1/input0
[ 463.327717] input: PCsensor Temper as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input10
[ 463.327950] generic-usb 0003:1130:660C.0007: input,hidraw6: USB HID
v1.10 Device [ PCsensor Temper] on usb-0000:00:1d.0-1.1/input1

Cheers,

Eriberto

[amorphic]

Yep, the different Vendor and Product IDs definitely mean that temper-python won't discover your device at the moment.

This may be easy to fix... I'll create a branch and let you know when it's ready to test.

[eribertomota]

Hum... Good!

Thanks! I liked your program because it has a configuration file. Do you
need some extra info?

Eriberto

2014-10-08 21:24 GMT-03:00 James Stewart notifications@github.com:

Yep, the different Vendor and Product IDs definitely mean that
temper-python won't discover your device at the moment.

This may be easy to fix... I'll create a branch and let you know when it's
ready to test.

—
Reply to this email directly or view it on GitHub
#20 (comment).

[amorphic]

Alright, can you check if your device is detected using my fork?

pip install git+git://github.com/amorphic/temper-python.git

[eribertomota]

Hi! Thanks again for your quick reply.

Detected, but I got these errors:

temper-poll -c

Found 1 devices
No handlers could be found for logger "temperusb.temper"
Traceback (most recent call last):
File "/usr/local/bin/temper-poll", line 9, in
load_entry_point('temperusb==1.2.1', 'console_scripts', 'temper-poll')()
File
"/usr/local/lib/python2.7/dist-packages/temperusb-1.2.1-py2.7.egg/temperusb/cli.py",
line 50, in main
'temperature_c': dev.get_temperature(),
File
"/usr/local/lib/python2.7/dist-packages/temperusb-1.2.1-py2.7.egg/temperusb/temper.py",
line 153, in get_temperature
self._interrupt_read()
File
"/usr/local/lib/python2.7/dist-packages/temperusb-1.2.1-py2.7.egg/temperusb/temper.py",
line 197, in _interrupt_read
data = self._device.read(ENDPOINT, REQ_INT_LEN, interface=INTERFACE,
timeout=TIMEOUT)
File
"/usr/local/lib/python2.7/dist-packages/pyusb-1.0.0b1-py2.7.egg/usb/core.py",
line 670, in read
self.__get_timeout(timeout)
File
"/usr/local/lib/python2.7/dist-packages/pyusb-1.0.0b1-py2.7.egg/usb/backend/libusb1.py",
line 798, in intr_read
timeout)
File
"/usr/local/lib/python2.7/dist-packages/pyusb-1.0.0b1-py2.7.egg/usb/backend/libusb1.py",
line 889, in __read
_check(retval)
File
"/usr/local/lib/python2.7/dist-packages/pyusb-1.0.0b1-py2.7.egg/usb/backend/libusb1.py",
line 571, in _check
raise USBError(_str_error[ret], ret, _libusb_errno[ret])
usb.core.USBError: [Errno 5] Input/output error

Cheers,

Eriberto

2014-10-09 8:15 GMT-03:00 James Stewart notifications@github.com:

Alright, can you check if your device is detected using my fork
https://github.com/amorphic/temper-python?

pip install git+git://github.com/amorphic/temper-python.git

—
Reply to this email directly or view it on GitHub
#20 (comment).

[amorphic]

Alas... it looks like it's a completely different chipset then. :(

[padelt]

Yes, the interaction with the device most likely must be different. Without documentation or a lot of logged interaction with the reference driver/application, there is nothing we can do.

If you can come up with any of this or even some working code, it would be useful to reopen this issue.
For now, I'll close it. Sorry @eribertomota !

[eribertomota]

Can I help or nothing to do?

The thermometer works fine using this code:

http://www.relavak.com/downloads/temper-1.0.tgz

More details here:

http://relavak.wordpress.com/2009/10/17/temper-temperature-sensor-linux-driver/

2014-10-09 9:46 GMT-03:00 James Stewart notifications@github.com:

Alas... it looks like it's a completely different chipset then. :(

—
Reply to this email directly or view it on GitHub
#20 (comment).

[eribertomota]

This code worked fine and can be used as reference.

https://github.com/kiloforce/PyTEMPer

2014-10-09 9:50 GMT-03:00 Philipp notifications@github.com:

Closed #20 #20.

—
Reply to this email directly or view it on GitHub
#20 (comment).

[amorphic]

Hmm... as I suspected:

This driver is for the device I got in the mail called the TEMPer. It seems that over time the manufacturer has put lots of different products in the market with the same name and very close to the same name all with different underlying implementations.

If your device works with relevak's driver then it should be possible to extract the relevant commands from that code and add them to temper-python. How's your Python? ;)

I might order one from DX and see what turns up. But that'll take a while...

[padelt]

Great to hear there is a reference! Should be no big thing to transfer the interaction patterns. Hope someone steps up to implement it!