Update config.yml

[Dargon789]

Summary by Sourcery

CI:

• Simplify CircleCI configuration to a single docker-based 'say-hello' job and corresponding workflow.

Run & review this pull request in StackBlitz Codeflow.

Review or Edit in CodeSandbox

Open the branch in Web Editor • VS Code • Insiders

Open Preview

The latest updates on your projects. Learn more about Vercel for GitHub.

Project	Deployment	Review	Updated (UTC)
sequence-js-docs	Ready	Preview, Comment	Dec 13, 2025 2:09pm
sequence-js-web	Error		Dec 13, 2025 2:09pm

Reviewer's Guide

Replaces the previous custom executor–based CircleCI setup with a minimal example job and workflow that simply runs a Docker-based job printing “Hello, World!”, aligning the config with CircleCI’s starter template.

Sequence diagram for updated CircleCI say-hello job execution

sequenceDiagram
  actor Developer
  participant GitHub
  participant CircleCI
  participant Workflow_say_hello_workflow
  participant Job_say_hello
  participant Docker_cimg_base_current

  Developer->>GitHub: Push commit / open PR
  GitHub->>CircleCI: Trigger webhook
  CircleCI->>Workflow_say_hello_workflow: Start workflow
  Workflow_say_hello_workflow->>Job_say_hello: Queue job
  Job_say_hello->>Docker_cimg_base_current: Start container
  Job_say_hello->>Job_say_hello: Step checkout
  Job_say_hello->>Job_say_hello: Step run echo Hello, World!
  Job_say_hello-->>Workflow_say_hello_workflow: Job success status
  Workflow_say_hello_workflow-->>CircleCI: Workflow success status
  CircleCI-->>Developer: Report build status

Loading

File-Level Changes

Change	Details	Files
Replace custom executor-based CircleCI configuration with a single Docker job that echoes a greeting.	Remove the reusable custom executor that configured an authenticated cimg/base:stable Docker image. Define a new say-hello job that runs directly with a cimg/base:current Docker executor. Add job steps to check out the repository and run a command that prints "Hello, World!" to the build logs. Replace the previous workflow wiring with a new say-hello-workflow that runs only the say-hello job.	.circleci/config.yml

---

Tips and commands

Interacting with Sourcery

• Trigger a new review: Comment @sourcery-ai review on the pull request.
• Continue discussions: Reply directly to Sourcery's review comments.
• Generate a GitHub issue from a review comment: Ask Sourcery to create an
  issue from a review comment by replying to it. You can also reply to a
  review comment with @sourcery-ai issue to create an issue from it.
• Generate a pull request title: Write @sourcery-ai anywhere in the pull
  request title to generate a title at any time. You can also comment
  @sourcery-ai title on the pull request to (re-)generate the title at any time.
• Generate a pull request summary: Write @sourcery-ai summary anywhere in
  the pull request body to generate a PR summary at any time exactly where you
  want it. You can also comment @sourcery-ai summary on the pull request to
  (re-)generate the summary at any time.
• Generate reviewer's guide: Comment @sourcery-ai guide on the pull
  request to (re-)generate the reviewer's guide at any time.
• Resolve all Sourcery comments: Comment @sourcery-ai resolve on the
  pull request to resolve all Sourcery comments. Useful if you've already
  addressed all the comments and don't want to see them anymore.
• Dismiss all Sourcery reviews: Comment @sourcery-ai dismiss on the pull
  request to dismiss all existing Sourcery reviews. Especially useful if you
  want to start fresh with a new review - don't forget to comment
  @sourcery-ai review to trigger a new review!

Customizing Your Experience

Access your dashboard to:

• Enable or disable review features such as the Sourcery-generated pull request
  summary, the reviewer's guide, and others.
• Change the review language.
• Add, remove or edit custom review instructions.
• Adjust other review settings.

Getting Help

• Contact our support team for questions or feedback.
• Visit our documentation for detailed guides and information.
• Keep in touch with the Sourcery team by following us on X/Twitter, LinkedIn or GitHub.

✅ Snyk checks have passed. No issues have been found so far.

Status	Scanner	Critical	High	Medium	Low	Total (0)
✅	Open Source Security	0	0	0	0	0 issues
✅	Code Security	0	0	0	0	0 issues

💻 Catch issues earlier using the plugins for VS Code, JetBrains IDEs, Visual Studio, and Eclipse.

Summary of Changes

Hello @Dargon789, I'm Gemini Code Assist¹! I'm currently reviewing this pull request and will post my feedback shortly. In the meantime, here's a summary to help you and other reviewers quickly get up to speed!

This pull request refactors the .circleci/config.yml file to replace a more complex, project-specific continuous integration setup with a basic, illustrative 'Hello, World!' example. The change streamlines the configuration, making it easier to understand the fundamental structure of a CircleCI pipeline.

Highlights

• CircleCI Configuration Simplification: The existing CircleCI configuration has been significantly simplified, removing a custom executor and a project-specific job definition.
• New 'say-hello' Job: A new job named 'say-hello' has been introduced, which uses the cimg/base:current Docker image and simply prints 'Hello, World!' to the console.
• Workflow Update: The workflow has been renamed from my-custom-workflow to say-hello-workflow and now orchestrates the newly defined 'say-hello' job.

Using Gemini Code Assist

The full guide for Gemini Code Assist can be found on our documentation page, here are some quick tips.

Invoking Gemini

You can request assistance from Gemini at any point by creating a comment using either /gemini <command> or @gemini-code-assist <command>. Below is a summary of the supported commands on the current page.

Feature	Command	Description
Code Review	/gemini review	Performs a code review for the current pull request in its current state.
Pull Request Summary	/gemini summary	Provides a summary of the current pull request in its current state.
Comment	@gemini-code-assist	Responds in comments when explicitly tagged, both in pull request comments and review comments.
Help	/gemini help	Displays a list of available commands.

Customization

To customize Gemini Code Assist for GitHub experience, repository maintainers can create a configuration file and/or provide a custom code review style guide (such as PEP-8 for Python) by creating and adding files to a .gemini/ folder in the base of the repository. Detailed instructions can be found here.

Limitations & Feedback

Gemini Code Assist may make mistakes. Please leave feedback on any instances where its feedback is incorrect or counter productive. You can react with 👍 and 👎 on @gemini-code-assist comments. If you're interested in giving your feedback about your experience with Gemini Code Assist for Github and other Google products, sign up here.

You can also get AI-powered code generation, chat, as well as code reviews directly in the IDE at no cost with the Gemini Code Assist IDE Extension.

Footnotes

1. Review the Privacy Notices, Generative AI Prohibited Use Policy, Terms of Service, and learn how to configure Gemini Code Assist in GitHub here. Gemini can make mistakes, so double check it and use code with caution. ↩

Code Review

This pull request simplifies the CircleCI configuration, replacing a more complex setup with a basic 'hello world' job. This is a positive change for clarity and maintainability. I have one suggestion to improve the long-term stability of the pipeline by pinning the Docker image to a specific version.

Hey there - I've reviewed your changes - here's some feedback:

• The previous my-custom-executor with Docker Hub authentication has been removed in favor of an inline docker executor; if the project still needs private image access, consider preserving or re-adding the executor with auth configuration.
• Renaming the job and workflow from web3-defi-game-project-/my-custom-workflow to say-hello/say-hello-workflow changes the pipeline behavior to a simple demo; confirm no other tooling or scripts depend on the old job/workflow names or behavior.

Prompt for AI Agents

Please address the comments from this code review:

## Overall Comments
- The previous `my-custom-executor` with Docker Hub authentication has been removed in favor of an inline `docker` executor; if the project still needs private image access, consider preserving or re-adding the executor with auth configuration.
- Renaming the job and workflow from `web3-defi-game-project-`/`my-custom-workflow` to `say-hello`/`say-hello-workflow` changes the pipeline behavior to a simple demo; confirm no other tooling or scripts depend on the old job/workflow names or behavior.

## Individual Comments

### Comment 1
<location> `.circleci/config.yml:11-14` </location>
<code_context>
+    docker:
+      # Specify the version you desire here
+      # See: https://circleci.com/developer/images/image/cimg/base
+      - image: cimg/base:current
+    #
+    # Add steps to the job
</code_context>

<issue_to_address>
**suggestion:** Consider pinning the Docker image to a specific version instead of `current` for reproducible builds.

`cimg/base:current` is a moving target and can change under you, making builds non-deterministic and harder to debug. Pinning to a specific tag (e.g., `cimg/base:2024.06`) keeps builds reproducible and isolates issues caused by base image changes.

```suggestion
    docker:
      # Specify the version you desire here
      # See: https://circleci.com/developer/images/image/cimg/base
      # Pin to a specific version for reproducible builds instead of using the moving "current" tag
      - image: cimg/base:2024.06
```
</issue_to_address>

---

Sourcery is free for open source - if you like our reviews please consider sharing them ✨

• X
• Mastodon
• LinkedIn
• Facebook

_{Help me be more useful! Please click 👍 or 👎 on each comment and I'll use the feedback to improve your reviews.}