A native Windows configuration and recovery toolkit for the Collective Minds PS4 Strike Pack FPS Dominator (model CM00085) running Firmware 3.
Downloads · Documentation · Support · Security
Model support: This project has only been developed and tested on the wired PS4 Strike Pack FPS Dominator, model CM00085, running Firmware 3. It has not been tested on any other Strike Pack, the Eliminator, wireless models, or other firmware versions, and may not work correctly on them. Verify your adapter's model and firmware before use.
Open Dominator Studio for the guided desktop workspace, or use Dominator
CLI (dominator.exe) for direct commands and automation. Both applications are
included in every release package and talk to the adapter over USB — no browser
or WebUSB extension is required.
Download Dominator Studio only from the official GitHub Releases page. The package is self-contained for x64 Windows and does not require a separate .NET installation.
Extract Dominator-1.0.0-beta-win-x64.zip and run either application:
| Application | Choose it for |
|---|---|
Dominator Studio (Dominator Studio\Dominator.Studio.exe) |
A guided desktop interface for paddles, controller tuning, Firmware 3 profiles, macros, recoil curves, lighting reference, saved configurations, and backup or recovery. |
Dominator CLI (Dominator CLI\dominator.exe) |
A scriptable interface for reading, diagnosing, configuring, verifying, and backing up the adapter, plus offline package inspection and DualShock 4 light-bar output. |
Unsigned release: the package is unsigned, so Windows may show an Unknown Publisher or SmartScreen prompt. Verify the matching
.sha256file from the Releases page before running.
Get-FileHash .\Dominator-1.0.0-beta-win-x64.zip -Algorithm SHA256
Get-Content .\Dominator-1.0.0-beta-win-x64.zip.sha256The hash printed by Get-FileHash must match the value in the checksum file.
- Connect the adapter to the PC with a data-capable USB cable. It appears as a configuration device; the browser configurator is not needed.
- Launch Dominator Studio. It detects the adapter, reads every setting, and shows Synced when it is ready.
- Make changes on any page. Each change is staged first — nothing is written until you choose Apply.
- On Apply, Studio saves a complete recovery backup, writes only what changed, reads it back, verifies it, and re-syncs.
Prefer the command line? A read-only overview:
dominator device info
dominator config show
dominator paddles showSee the CLI guide for the full command surface.
- Automatic sync and verified writes — connect, read, stage, back up, write, read back, verify, and re-sync, so the adapter is never left half-configured.
- Light and dark themes with a one-click toggle and clear status colors.
- Controller — centered left and right paddles with their real Firmware 3 mode, button remapping, trigger and stick tuning, and behavior flags.
- Modes and menus — the exact on-controller steps to switch between Tournament Mode and New Experience M.O.D. Mode and open the Config Menu.
- Guided setup and a live input test to confirm a controller's buttons, sticks, triggers, and touchpad.
- Mod Options — every documented Firmware 3 New Experience M.O.D. in one place, with search, per-setting reset, and reset to defaults.
- Weapons and macros — eight weapon presets, a visual recoil-curve editor with a timeline view, smoothing, scaling, mirroring, an anti-recoil generator, copy-to-all, and a full macro editor.
- Saved configurations — save the current setup under a name and switch between setups in one click.
- Backup, restore, and compare — complete device backups and a difference report against any saved backup.
- Lighting reference for the controller light bar and the adapter's indicators, separating what is host-controllable from what is not.
- x64 Windows 11 is recommended; Windows 10 is supported.
- The wired PS4 Strike Pack FPS Dominator, model CM00085.
- Firmware 3 on the adapter.
- A data-capable USB connection between the adapter and the PC.
This software configures the adapter. It does not provide a PC controller input driver and does not change the manufacturer's platform-compatibility guidance.
Start with Getting started, then use the Studio guide and CLI guide.
Focused guides cover Firmware 3 settings, macros and weapon curves, lighting and indicators, backups and recovery, firmware updates, and troubleshooting.
- Read SUPPORT.md before opening a GitHub issue.
- Report security concerns through the private process in SECURITY.md; never place device backups or serial numbers in a public issue.
- Contributions are welcome under CONTRIBUTING.md.
Dominator Studio is licensed under the GNU General Public License v3.0. Dependency and bundled-component provenance is documented in THIRD-PARTY-NOTICES.md.
This is an independent project. STRIKE PACK and Collective Minds are trademarks of their respective owners. This project is not affiliated with, endorsed by, or supported by Collective Minds, Sony Interactive Entertainment, or the PlayStation brand. DualShock is a trademark of Sony Interactive Entertainment.