AV Point Code Connection by BACnet IP

[davidfungf]

When I configure the AV point code, it returned an error "Error(3011): Plugin tag not ready". AI point codes work fine. Something wrong of my AV point code configuration? Thanks.

BMS Source

Neuron Screen Capture

[ZhouBox]

Which version of Neuron you are using?

[davidfungf]

I am using version 2.6.9

[davidfungf]

I upgraded it to version 3.3.0. Same result even though the device is connected. I used tcpdump -n udp port 47809 -X command to monitor the udp traffic. I uploaded the captured traffic file here for your analysis.

[ZhouBox]

AI and AV on the same device?

[davidfungf]

AI is belong to another sites. No BBMD device in the site. If we connect to the site via BBMD, does Neuron support it?

[ZhouBox]

I analyzed your packet capture file and found that the packet was sent to BBMD. Since the neuron is a PTP packet, you can change the configured IP to the device's IP, such as 10.168.25.169, to see if the data can be read。

[davidfungf]

Yes, I did. Here is another file. It connected to the device 10.168.25.169.

[ZhouBox]

AI is belong to another sites. No BBMD device in the site. If we connect to the site via BBMD, does Neuron support it?

Based on the current actual test results, it appears that. Neuron no support via BBMD.

[davidfungf]

I see. Thank you for your support!

[ZhouBox]

@davidfungf 34 ping 169 is OK？

[ZhouBox]

@davidfungf As far as I know, BBMD is a broadcast forwarding function between different subnets, and does not have a network routing function, or does it need to be configured with routing function.

[davidfungf]

Currently, we are using enteliWeb to read the BMS devices. We want to replace it by Neuro but I don't know how enteliWeb do it.

[ZhouBox]

Thank you, I will study it.

[davidfungf]

Neuron supports BBMD now?