js051 · js051 · Aug 23, 2026 · Aug 23, 2026
diff --git a/CHANGELOG.md b/CHANGELOG.md
@@ -4,6 +4,10 @@ All notable release-level changes to Open EOS Control are documented here.
 
 ## [Unreleased]
 
+## [0.6.1] - 2026-08-24
+
+- Fixed the Android exposure picker so ISO, shutter, aperture, and white-balance tabs no longer overlap the current value. Phone layouts now show three complete values, tablet layouts show five, and the camera-write progress indicator no longer shifts the tabs.
+
 ## [0.6.0] - 2026-08-21
 
 - Added Android handoff from a single camera item or a multi-selection to Serein through explicit, temporary read-only `content://` grants. Open EOS Control stages and hashes complete originals, accepts only exact-session receipt batches, and verifies imported byte lengths and SHA-256 values without modifying camera media.
@@ -143,3 +147,4 @@ This preview still requires broader Canon EOS R6 Mark III physical-device valida
 [0.4.0]: https://github.com/js051/open-eos-control/releases/tag/v0.4.0
 [0.5.0]: https://github.com/js051/open-eos-control/releases/tag/v0.5.0
 [0.6.0]: https://github.com/js051/open-eos-control/releases/tag/v0.6.0
+[0.6.1]: https://github.com/js051/open-eos-control/releases/tag/v0.6.1
diff --git a/README.md b/README.md
@@ -4,7 +4,7 @@ English | [Traditional Chinese](README.zh-TW.md)
 
 Open EOS Control is an unofficial, open-source Canon EOS control project. It targets Canon EOS R6 Mark III first and is structured around PC, iOS, and Android clients that share the same camera-control concepts.
 
-The current development preview is [v0.6.0](docs/releases/v0.6.0.md). It is intended for testing and contributor feedback, not production camera workflows.
+The current development preview is [v0.6.1](docs/releases/v0.6.1.md). It is intended for testing and contributor feedback, not production camera workflows.
 
 The project is not CCAPI-only. CCAPI over Wi-Fi is the most validated backend. Android also has a standards-based USB/PTP backend and capability-gated Canon EOS controls. Android and iOS can both use the executable Desktop Bridge to control a camera connected to a PC by USB through the same camera contract. The Canon USB paths are grounded in pinned libgphoto2 behavior and covered by deterministic tests, but still require a recorded physical R6 Mark III validation. The PC bridge provides a tested API and responsive control UI through either open-source `gphoto2` USB or native HTTP CCAPI. Native Swift CCAPI and Desktop Bridge clients plus an iOS 17 SwiftUI app are implemented with English/Traditional Chinese UI and iPhone Simulator coverage; physical iPhone and camera validation remains.
 

diff --git a/README.zh-TW.md b/README.zh-TW.md
@@ -4,7 +4,7 @@
 
 Open EOS Control 是一個非官方、開源的 Canon EOS 控制專案。第一個真機優先目標是 Canon EOS R6 Mark III，架構上讓 PC、iOS、Android 三端共用同一套相機控制概念。
 
-目前的開發預覽版為 [v0.6.0](docs/releases/v0.6.0.md)，用途是測試與收集貢獻者回饋，不建議用於正式拍攝流程。
+目前的開發預覽版為 [v0.6.1](docs/releases/v0.6.1.md)，用途是測試與收集貢獻者回饋，不建議用於正式拍攝流程。
 
 這個專案不是只做 CCAPI。目前驗證最完整的是 Wi-Fi 上的 CCAPI；Android 也已有標準 USB/PTP backend 與依能力開放的 Canon EOS 控制。Android 與 iOS 現在都能透過同一套 camera contract 使用可執行的 Desktop Bridge，控制以 USB 接在電腦上的相機。Canon USB 路徑以固定版本的 libgphoto2 行為為依據並有可重現測試，但仍需留下 R6 Mark III 真機驗證紀錄。PC bridge 可透過開源 `gphoto2` USB 或原生 HTTP CCAPI 提供經測試的 API 與內建響應式控制介面。原生 Swift CCAPI／Desktop Bridge client 與 iOS 17 SwiftUI App 已實作，具英文／繁中介面及 iPhone Simulator 測試；實體 iPhone 與相機驗證仍待完成。
 

diff --git a/android/app/build.gradle.kts b/android/app/build.gradle.kts
@@ -23,8 +23,8 @@ android {
         applicationId = "dev.openeos.control"
         minSdk = 26
         targetSdk = 35
-        versionCode = 17
-        versionName = "0.6.0"
+        versionCode = 18
+        versionName = "0.6.1"
         testInstrumentationRunner = "androidx.test.runner.AndroidJUnitRunner"
     }
 

diff --git a/bridge/open_eos_bridge/__init__.py b/bridge/open_eos_bridge/__init__.py
@@ -1,3 +1,3 @@
 """Open EOS Control desktop bridge."""
 
-__version__ = "0.6.0"
+__version__ = "0.6.1"
diff --git a/bridge/pyproject.toml b/bridge/pyproject.toml
@@ -4,7 +4,7 @@ build-backend = "setuptools.build_meta"
 
 [project]
 name = "open-eos-control-bridge"
-version = "0.6.0"
+version = "0.6.1"
 description = "Open EOS Control desktop camera bridge"
 readme = "README.md"
 license = "Apache-2.0"

diff --git a/docs/releases/v0.6.1.md b/docs/releases/v0.6.1.md
@@ -0,0 +1,39 @@
+# Open EOS Control v0.6.1 Development Preview
+
+[繁體中文](#繁體中文) | [English](#english)
+
+## 繁體中文
+
+這個 `0.6.1` 開發預覽版修正 Android 曝光參數選擇器在調整 ISO、快門、光圈與白平衡時的重疊與邊緣裁切。這是 `0.6.0` 的向下相容介面修正版。
+
+### 曝光調整介面
+
+- 參數頁籤與數值軌道改為固定的上下分區，不再從同一個位置堆疊標題與目前值。
+- 手機顯示完整的前一個、目前與下一個值；較寬的平板顯示五個完整值，不再於左右邊緣露出半截文字。
+- 選取框保留在目前值內，設定寫入中的進度指示器使用固定槽位，不會讓 ISO／Tv／Av／WB 頁籤左右跳動。
+- 移除重複的參數標題／目前值列，保留頁籤與中央選取值作為單一清楚的資訊來源。
+
+### 驗證與限制
+
+- 已以 360x800、繁中、150% 字體驗證頁籤、前後值與選取框幾何，並人工檢查輸出的畫面快照。
+- Pixel API 34 與 API 36 AVD 的完整 Android UI 矩陣、Android 單元測試、lint、APK 建置與簽章 smoke test 均已通過。
+- 本修正尚未在實體 Android 手機安裝後重新確認；它不變更 CCAPI、USB/PTP、能力偵測或相機寫入語意，也不新增任何實體相機相容性宣稱。
+- `open-eos-control-android-0.6.1-debug.apk` 沿用固定開發簽章，可覆蓋安裝 v0.1.5 之後的同簽章預覽版。本版仍是 Development Preview，不是穩定版。
+
+## English
+
+This `0.6.1` development preview fixes overlap and edge clipping in the Android exposure picker while adjusting ISO, shutter, aperture, and white balance. It is a backward-compatible UI patch for `0.6.0`.
+
+### Exposure Adjustment UI
+
+- Parameter tabs and the value track now occupy fixed separate rows instead of stacking the title and current value at the same origin.
+- Phones show complete previous, current, and next values. Wider tablets show five complete values instead of clipped fragments at both edges.
+- The selection frame remains inside the current value, and camera-write progress uses a reserved slot so ISO/Tv/Av/WB tabs do not shift.
+- The redundant parameter-title/current-value row is removed, leaving the selected tab and centered value as one clear source of state.
+
+### Validation And Limitations
+
+- The layout was verified at 360x800 with Traditional Chinese and 150% font scale, including geometry assertions and manual inspection of the generated visual snapshot.
+- The complete Android UI matrices on Pixel API 34 and API 36 AVDs, Android unit tests, lint, APK build, and signer smoke test all passed.
+- This fix has not yet been rechecked after installation on a physical Android phone. It does not change CCAPI, USB/PTP, capability discovery, or camera-write semantics, and adds no physical-camera compatibility claim.
+- `open-eos-control-android-0.6.1-debug.apk` retains the stable development signer and can update matching previews from v0.1.5 onward. This remains a Development Preview, not a stable release.
diff --git a/ios/OpenEOSControl/project.yml b/ios/OpenEOSControl/project.yml
@@ -20,8 +20,8 @@ targets:
         INFOPLIST_FILE: App/Info.plist
         PRODUCT_BUNDLE_IDENTIFIER: dev.openeos.control
         PRODUCT_NAME: OpenEOSControl
-        MARKETING_VERSION: 0.6.0
-        CURRENT_PROJECT_VERSION: 15
+        MARKETING_VERSION: 0.6.1
+        CURRENT_PROJECT_VERSION: 16
         SWIFT_VERSION: 5.10
         TARGETED_DEVICE_FAMILY: "1,2"
         ASSETCATALOG_COMPILER_APPICON_NAME: AppIcon

diff --git a/simulator/pyproject.toml b/simulator/pyproject.toml
@@ -4,7 +4,7 @@ build-backend = "setuptools.build_meta"
 
 [project]
 name = "open-eos-control-simulator"
-version = "0.6.0"
+version = "0.6.1"
 description = "Fake Canon camera simulator for Open EOS Control"
 license = "Apache-2.0"
 requires-python = ">=3.12"