Conversation
…tches the device The flasher no longer asks whether to erase. A board whose firmware does not answer Improv is treated as new and wiped, which is ESP Web Tools' own default; a board already running Patternflow (every edition answers with that name) is still updated in place and keeps its patterns and Wi-Fi. It also removes one way the Wi-Fi step went missing: an install without erase finishes on the dashboard instead of provisioning. BUILD_GUIDE §8/§9 now say what a first install actually shows: the Pattern tab, typing the SSID (no list, case-sensitive, 2.4 GHz), RST and reconnect when the install ends without asking for Wi-Fi, Format storage before the Basics pack lands, the Device address field on Android, up to five saved networks on the console's Wi-Fi page, that download mode now means an erase, that the hotspot arrives after v3.10.4 (Performance v0.4.0 has it), and that K2 opens NETWORK, not an OSC screen. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- README: the Capture panel is Graphic Export; batch generation needs a Gemini key or an AI chat - AUDIO_GUIDE: "Mapping editor", the mic's switch is Microphone (AUD is the extension and phone input), MIDI is switched off on the console's MIDI page - the Audio edition's NETWORK screen has room for two rows - mqtt-spec: two panels follow each other on Live; channels 1-4 force Subscriber, so the old example could not have a leader - EDITIONS: three editions are on the shelf, not four - rest-api: the clock is in the Performance edition - pfst-v2-spec, LICENSE-SUMMARY, the Ableton README and web/ARCHITECTURE point at what exists now - sitemap lists /editions instead of the /variants redirect Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A scroll-driven page over a fixed 3D Patternflow: the landing page's model re-wired to a firmware simulator (lib/guide/deviceSim.ts, the device's own screens ported from patternflow.ino in panelScreens.ts), the v3.9 board exported from KiCad, the ESP32 DevKit, chapters one to four in English and Korean, and a Guide link in the site nav. Checkpoint before the case model, the flasher screens and the console window land. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
…nsole - The case is the v3.9 enclosure from hardware/case/source (collection 0904_v3.9): body, back slider, back plate, front lid and the four knobs, in the landing model's frame. The ESP32 comes out the way the case allows: the back slider runs off along its dovetails, then the DevKit lifts off its pins. Board and DevKit sit at the assembly's depths, clear of the case. - Chapter one: the cable unplugs and drops before the DevKit moves and is never carried round with it; BOOT/RST runs on a slower shared clock with the chips in the card; the RST fallback sits in the Wi-Fi card; framing and phone camera reworked. - The flasher is shown as it is: ESP Web Tools 10's own dialog, rendered state by state with this site's manifest and the firmware's Improv answers (web/public/guide/flasher). - Chapter four embeds the device console itself: firmware/toolchain/ console_demo.py builds the core pages with a mock device into web/public/guide/console-demo, and ConsoleWindow bridges it to the 3D board (pick a pattern there, the panel follows). --check says when the demo is stale. - Critics' pass: pattern stream behind the device, tag leaders, DevKit materials, card heights on phones, stutter on first cable/console load, pad keyboard support, Korean copy. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A portrait line holds ten characters of the 5x7 font, and Adafruit GFX
wraps an eleventh onto the next line by itself. KNOB MAP's "TURN = SHOW"
put a lone "W" in front of "K3 = EXIT", the install screen's "web console"
did the same, and the default host name "patternflow" lost its "w" on the
hotspot and UPDATE screens. The labels are shorter ("TURN=SHOW",
"console"), and names that can outgrow a line go through drawCenteredFit,
which breaks them into lines of ten — before a '-' or '.', else before
"flow" — so "pattern" / "flow-a1b2" and "pattern" / "flow.local" land on
the lines they had. build.sh all: default, audio, performance, clock and
midi all build; check_boundaries holds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
…ramed as a deck to put on - Each knob gets a dial: a dark track on the case with an orange dot riding it at the knob's angle, faint wherever knobs are the subject and bright while a hand is on it. The track takes a drag as well as the knob does. - Beside the knob's K tag, while it moves or is hovered: what the running pattern calls it and its value, with a bar for where that sits in its range (DeviceSim.knobReadout; Origin's hue/speed/tiling/freq, else the pattern's @knobs names). Origin's click moves the readout back with it. - The two "your turn" steps and the control pad are gone; how to play the one on the page moved into the "Turn" step. - Chapter three's deck step now invites putting the Basics deck on, and says a single pattern goes on the same way from its own page. - panelScreens follows the firmware's text fix (TURN=SHOW, drawCenteredFit). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
…says where Each step now has an address (#flash-3) and a quiet link at the foot of its card that opens the new guide_stuck issue form with the chapter, the step, a link back to it and the browser filled in; the reader only says what happened. The end of the page has one for anywhere else. The closing card now reads as what comes next: the next guide (community, then Pattern Lab with layers, Graphic Export and Director inside it) and the rest after that, instead of ten numbered chapters. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
… README The Flash Patternflow block's help link goes to the guide's first chapter, with the written §8 beside it; §8.1 and "Playing it" say where to see it done on a board you can turn. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
public/guide/console-demo is written by console_demo.py (the core's console pages and a simulated board, fflate vendored beside them); CI's lint failed on fflate's minified source. console_demo.py --check is what keeps it right. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The guide is two pages now: /guide keeps the first hour (01-04) and its closing card links on; /guide/make (and /ko) is "Make your own", starting on a board that is already powered with Basics on it. 05 Community walks the real site: the wall, which patterns can go on a board (.h / Flashable now), sending one pattern, your own deck in the dock, other people's decks, and "Open in Pattern Lab". Every screen is a crop of the live site, taken logged out, with a ring on the control the step is about and its caption quoting the UI's own words. 06 Pattern Lab: from here the board plays the reader's own Lab draft. It reads patternflow_lab_project_v2 read-only and follows every save the Lab makes, in this window or another tab. The real /pattern-lab opens in a window beside it. The steps go in the order the work happens: name it, ask an AI, the Color Ramp, the knobs, the second prompt that makes the .h, Apply to my Patternflow, layers, Graphic Export, Director, and giving it back. The screens are real Lab crops. Walking both pages leaves every patternflow_lab_* key byte-identical. A draft that doesn't run doesn't leave the board dark. Bloom is held down while a draft plays, so black stays black. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The console's one-click install from a link (/patterns?src=) took only .pfm and .json from a build's file list, so the catalog.txt every deck build carries was left behind: a deck sent from the dock landed in alphabetical order, while the Decks page and the dock both promise the order it was built in. A dropped zip already kept it. Both ways in now go through one rule, installable(): catalog.txt and .pfs ride along, performance.json stays behind. The guide's console demo is regenerated from the page. The guide's deck step says the order is dropped up to v3.10.4 and kept after. build.sh all: default, audio, performance, clock, midi ok; check_boundaries holds. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A WIP chip sits beside the brand on both guide pages: it ships while it is still being written. The pattern page's Performances note, the performance modal and the route's error named the Director's old "Save-JSON"; the Director saves .pfs. CHANGELOG records the guide, the wording and the deck-order fix. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
web: /guide/make — 05 Community and 06 Pattern Lab
web: /guide — the first hour on a Patternflow you can turn (01–04)
|
The latest updates on your projects. Learn more about Vercel for GitHub.
|
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
1 participant
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Everything on dev since #460.
What's in it
Web
/guideand/guide/kocover the first hour: 01 Flash, 02 Knobs, 03 Patterns, 04 Console./guide/makeand/guide/make/kocover 05 Community and 06 Pattern Lab.guide_stuck.ymlissue.new_install_prompt_erase: false). The BUILD_GUIDE's first hour now matches what the device does..pfsin its Performances note, instead of "Save-JSON".Firmware (on the tree; boards get these at the next release)
catalog.txt, the same way a dropped zip does.Docs: stale references fixed across the guides and specs.
Checked
build.sh all: all five compositions ok;check_boundaries.pyholds.console_pages.py checkandconsole_demo.py --checkpass.npm run buildpasses; tsc, eslint and vitest (123 tests) are clean.Not checked on hardware
🤖 Generated with Claude Code